BOGE focus control 2.0
focus control 2.0 replaces the older focus control on units built after ~2018.
Manufacturer
BOGE
Display
5.7" color TFT touch.
Years produced
~2018 – present. Replaces original focus control.
Power supply
24 VDC internal PSU.
Ambient range
0 – 46 °C.
Protection rating
IP54 front.
Relay outputs
Main / star / delta, blowdown, dryer, alarm, remote-run.
Replaces
focus control (original)
Used on
Features
- airtelligence provis network master compatible
- Sequencing up to 16 compressors
- Predictive maintenance timers by hours and calendar
- Multi-language HMI
Interfaces
- Ethernet Modbus TCP / Profinet
- RS-485
- USB service port
Sensor inputs
- Airend discharge temp
- Sump pressure
- Line pressure
- Separator ΔP
- Fluid filter ΔP (option)
Fault code lookup
First checks
- Coolant level & cooler
- Thermal valve
- Sensor resistance
First checks
- Check motor cooling & load
- Test PTC continuity
First checks
- Change separator, filter, coolant as set
First checks
- Change filter; sample coolant
First checks
- Reset overload; verify FLA; phase balance
First checks
- Verify 3 phases; swap for rotation
First checks
- Release; check remote loop
First checks
- Perform kit; reset timer
Fault list is non-exhaustive and firmware-dependent. Always confirm against the controller’s on-screen help or OEM manual.
Sensor pin resistance & signal values
Pin-level resistance and signal values for the sensor types this controller uses. Works offline. De-energise the panel and lift one lead before ohming any element.
Wiring notes
- 24 VDC control power
- Modbus-linked VFD on VSD-equipped units
Known issues & field notes
- Language pack loss after firmware reflash — reload from USB
Field tips (web-sourced)
Distilled from public OEM manuals and community technician references. Cross-check the on-machine service manual before commissioning.
Menu / access
- Home screen → middle key then right key (quickly) exposes an 8-digit challenge code.
- Call BOGE service with the 8-digit challenge; they return a 6-digit access code that unlocks the service menu for 12 hours.
- Access is by RFID chip when configured — technician RFID replaces the challenge/response prompt.
Field gotchas
- focus control 2.0 can master up to 4 machines (fixed or VSD) natively — no external sequencer needed.
- Firmware updates ship on USB; the USB port is behind the front door and requires a service login before it will read the stick.
Best public references
Manuals & literature
Your manuals
Sign in to upload and pin your own PDF manuals to this controller.