BOGE S Series Rotary Screw

S 15–S 341

AirCompDX - Field Reference for Air Compressor Techs
All modelsBOGE manual portal

BOGE S Series Rotary Screw

15–450 hp oil-flooded rotary screw. Belt or direct drive. focus control 2.0 HMI.

Type
Oil-flooded rotary screw
Power
15–450 hp
Flow
50–2,000 cfm
Pressure
100–188 psig
Cooling
air-or-water
Drive
belt-or-direct
Lubrication
oil-flooded
Models
S 15–S 341
Years produced
BOGE (Germany) since 1907; S-Series current-gen ~2018.
Sound level
~65–75 dB(A) @ 1 m enclosed.
Ambient range
40–115 °F.
Motor efficiency
IE3 / IE4 standard EU spec.
Warranty
5-year airend option.
Control modes
  • Load/Unload
  • VSD (SLF direct-drive PM)
  • airtelligence sequencing
Typical applications
  • Manufacturing
  • Automotive
  • Food & bev (with H1 fluid)

Specs & intervals below are from publicly published OEM literature and long-standing field practice. Torque values, exact revision-dated part numbers, and safety-critical settings vary by serial number — always cross-check the unit’s OEM manual and nameplate before ordering parts or performing service.

Fluid
Spec: BOGE Syprem (PAO)
Change interval: 8,000 hr
Wear parts
CategoryIntervalSource
Air filter2,000 hr
Oil filter2,000 hr
Separator element4,000 hr
Motor bearingsPer motor plate

Consumable part numbers change by revision and region — pull the current number from the OEM portal.

Parts cross-reference

OEM part numbers with commonly-cited aftermarket equivalents. Verify against the nameplate and OEM parts portal before ordering — dimensionally similar filters can still be wrong for the application.

Air filter
Intake filter
OEM
575000102
Aftermarket
  • P828889— Donaldson
  • C 24 650/1— Mann-Filter
VerifiedConfirmed against a public OEM or aftermarket catalog / cross-reference tool at time of entry.LikelyCommonly cited in the vendor's cross tool or long-standing field usage; not independently re-verified against the current OEM parts list.UnverifiedDimensional lookalike or user-reported.
  • P828889— DonaldsonLikely
    source
  • C 24 650/1— Mann-FilterLikely
    source
Oil / fluid filter
Oil filter
OEM
575000203
Aftermarket
  • P550425— Donaldson
  • B7577— Baldwin
VerifiedConfirmed against a public OEM or aftermarket catalog / cross-reference tool at time of entry.LikelyCommonly cited in the vendor's cross tool or long-standing field usage; not independently re-verified against the current OEM parts list.UnverifiedDimensional lookalike or user-reported.
Air-oil separator
Separator
OEM
575000710
Aftermarket
  • P532473— Donaldson
  • OS 5223— Hifi
VerifiedConfirmed against a public OEM or aftermarket catalog / cross-reference tool at time of entry.LikelyCommonly cited in the vendor's cross tool or long-standing field usage; not independently re-verified against the current OEM parts list.UnverifiedDimensional lookalike or user-reported.
Lubricant
BOGE Syprem (PAO)
OEM
596000201GL
Aftermarket
  • Rarus SHC 1025— Mobil
VerifiedConfirmed against a public OEM or aftermarket catalog / cross-reference tool at time of entry.LikelyCommonly cited in the vendor's cross tool or long-standing field usage; not independently re-verified against the current OEM parts list.UnverifiedDimensional lookalike or user-reported.
  • Rarus SHC 1025— MobilUnverified

Need to look up a number across all models? Use the parts cross-reference search.

Preventive maintenance
Daily
  • Check fluid level in sight glass at running temp
  • Listen for unusual noise / vibration
  • Check discharge pressure & temperature vs baseline
  • Verify condensate drain function
  • Log package amps if metered
Weekly
  • Blow down receiver and drain traps
  • Check for oil carryover at first drop leg
  • Inspect for fluid or air leaks around airend and separator tank
  • Verify safety valve is not weeping
Every 2,000 hr / 6 mo
  • Change fluid filter
  • Change air filter (or sooner per ΔP)
  • Sample fluid for TAN / metals / water
  • Clean cooler exterior with low-pressure air (never > 30 psi against fins)
Every 4,000 hr / 12 mo
  • Change separator element
  • Change fluid
  • Inspect scavenge line & orifice for coking
  • Check coupling / belt alignment & wear
  • Torque electrical lugs to spec (typ. 45–75 in-lb #4–2/0 AWG)
Every 8,000 hr
  • Rebuild inlet valve
  • Rebuild minimum-pressure check valve
  • Regrease or replace motor bearings per OEM interval
  • Verify safety valve setpoint against gauge
Common faults & first checks
  • E01 airend temp high
  • E05 sep ΔP
Controller(s)
Strengths
  • German engineering quality
  • airtelligence sequencing
  • SLF direct-drive PM motor option
Weaknesses
  • NA dealer coverage regional
Field notes

BOGE S Series is the mainstream industrial screw line.

Related