Elektronikon Touch
Current-generation Atlas Copco controller. UI is language-icon based, so screenshots translate well across regions.
Manufacturer
Atlas Copco
Display
5-inch capacitive color touchscreen (icon-driven).
Years produced
~2016 – present.
Power supply
24 VDC, 5-inch color capacitive touchscreen.
Ambient range
0 – 55 °C.
Protection rating
IP54 front.
Relay outputs
Configurable up to 8 relays plus 4 digital outputs.
Replaces
Elektronikon Graphic (partial)
Used on
- GA 5–90 VSD+
- GA 110–160 VSD
- ZR/ZT VSD+
- G/GX current builds
Features
- Icon-based UI in 30+ languages
- SMARTLINK remote monitoring
- VSD ramp tuning
- Integrated dryer/aftercooler control
Interfaces
- Ethernet (Modbus TCP, SMARTLINK)
- USB (data export)
- CAN expansion bus
Sensor inputs
- Element outlet temp
- Line/vessel pressure
- Oil pressure (screw)
- Dewpoint (integrated dryer)
Common fault codes
First checks
- Cooler fan / cleanliness
- Oil level
- Sensor calibration
First checks
- Check refrigerant charge (in-frame dryer)
- Condensate drain flowing?
- Ambient too high?
First checks
- Fiber-optic / RS-485 cable between controller and drive
- Drive power supply
- Firmware compat after board swap
First checks
- Reset all E-stops on machine and remote panels
- Check door interlocks
Fault list is non-exhaustive and firmware-dependent. Always confirm against the controller’s on-screen help or OEM manual.
Wiring notes
- Ethernet drop for SMARTLINK
- CAN bus to expansion I/O
- Do NOT hot-swap — power down before pulling ribbon
Known issues & field notes
- Touchscreen calibration drifts after board swap — recal via service menu
- USB export truncated after ~30 days of trend data — pull weekly for long-term
Levels: Operator (open), Technician (~2003), Service (Atlas Copco rep only). Codes can be changed on commissioning — always ask the site for current code before assuming defaults.
Manuals & literature
Your manuals
Sign in to upload and pin your own PDF manuals to this controller.