1
Below balance point — normal operation
infoCheckCalculate design balance point vs outdoor temp.
FixBelow balance point, aux heat should assist. Confirm W1 stages properly.
2
Undersized equipment / air leaks
lowCheckManual J load vs installed tons; blower door.
FixAir-seal, add insulation, or upsize (Manual J).
3
Low charge / dirty coil hurting capacity
medCheckSuperheat/subcool; coil visual.
FixRecover/recharge; clean coils.
Safety
Pull the disconnect and lock out before opening HVAC equipment. Discharge dual-run capacitors before handling. Refrigerant recovery and brazing require EPA 608 certification and proper PPE.
